Emc Qlogic QLA23xx Uživatelský manuál Strana 26
- Strana / 78
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
2
2-14
EMC Fibre Channel with QLogic HBAs in Windows Hosts
Installing and Configuring the HBA Driver
Installing the HBA Driver
To use EMC storage array disks with a Windows host, you need an
EMC-qualified Fibre Channel HBA driver. The HBA kit includes an
EMC-approved driver, which must be installed and configured prior
to partitioning the storage array disks. You should also check the
QLogic website for the latest EMC-approved version. (Refer to
Downloading QLogic Drivers and Firmware on page 2-2.)
Driver Revision
History
Driver support is as follows:
◆ Version 8.1.5.20 — QLA22xx, QLA23xx (no CX200-Series
direct-connect dual host cluster), Windows NT, Windows 2000
◆ Version 8.1.5.21 — QLA23xx, Windows NT, Windows 2000
◆ Version 8.2.1.20 — QLA23xx, Windows 2000
◆ Version 8.2.2.20 — QLA23xx STORPort, Windows 2003 only
◆ Version 8.2.2.25 — QLA23xx, Windows 2000 and Windows 2003
Where to Find the
Driver
You can find the driver:
◆ on the QLogic CD-ROM that accompanied the HBA. Copy the
driver from the OS-specific directory:\WindowsNT4 or
\Windows2000.
◆ on the QLogic website. Refer to Downloading QLogic Drivers and
Firmware on page 2-2.
To ease installation of the driver, unzip the driver file onto a blank
diskette.
Windows 2003
STORPort Updates
Currently the shipping version of Windows 2003 requires post-RTM
hotfixes to resolve some known issues. For all Windows 2003
STORPort installations, you should obtain the hotfix listed in
Microsoft Knowledge Base Article Q820362.
Install this patch before installing the HBA driver.
- EMC Fibre Channel with 1
- Windows Environment 1
- Contents 3
- Appendix B Troubleshooting 5
- AVANT GARDE 8
- Introduction 10
- Installing and 13
- Configuring the HBA 13
- Installing an HBA 15
- Clustering Configurations 16
- EMC HBA Settings 20
- Configuring NVRAM 21
- Manually Setting the 24
- HBA Data Rate 24
- Setting the Topology 25
- Installing the HBA Driver 26
- Controller 27
- Windows NT 4.0 31
- Configuring an EMC 33
- Boot Device 33
- How to Determine 35
- I/O Latency and 35
- Load on the Boot 35
- Boot Crashdump 36
- Save to Disk 36
- Behavior 36
- Configuring the Boot 37
- Installing the 39
- Windows OS onto 39
- FROM SAN BL20p 41
- Procedure 42
- Flowchart 42
- Requirements 44
- Preparing the 45
- Storage System 45
- Setting Up the HBA 46
- Preparing the Fabric 47
- QLogic Corporation 48
- Preparing the Server 50
- Boot BIOS 52
- Installing Windows 54
- Verifying HBA Driver 57
- Signature 57
- Installation 57
- Fast!UTIL Options 60
- CTRL-Q BIOS 60
- Starting a Fresh 63
- Replacing a Boot HBA 65
- Known Issues 67
- Third-Party Software 69
- Troubleshooting 73
- Problems and Solutions 74
- Event ID: 11 75
- Source: ql2300 75
Související produkty a manuály pro Hardware Emc Qlogic QLA23xx
Hardware Emc QLogic Uživatelský manuál
(104 stránky)
(104 stránky)
Kompernass SILVERCREST KH 1281 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Żelazka Kompernass SILVERCREST KH 1281.
Dostarczamy 1 pdf podręczników Kompernass SILVERCREST KH 1281 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Komentáře k této Příručce