EMC QLogic Instalační příručka stáhnout pdf (Strana 119)

Manually installing the HBA driver – Advanced users

117

Miscellaneous Planning and Procedures

14. If the system again requests that you reboot the system, select No;

then click Close.

15. If you have other adapters to update, select the next adapter in

the device manager and repeat steps Step 6 through Step 14.

16. When all adapters have their drivers updated, select Yes to the

reboot prompt.

If you are not promoted to reboot, reboot your server anyway.

Updating the HBA driver in a Windows 2000, 2003, or Windows 2008 hosts

On Windows 2000, 2003, and Windows 2008 systems where the

QLogic HBA has been detected automatically or a driver is already

installed, it may be necessary to update the current driver to the latest

EMC-qualified driver, as described in this section.

The following procedure assumes that you have copied the latest

driver from the QLogic CD-ROM or downloaded it from the QLogic

website and put it onto a diskette. Refer to the release notes provided

with the driver for information that might be unique to new driver

revisions.

To install the driver into a Windows 2000, 2003, or Windows 2008

host:

1. Boot the host (if necessary) with Windows 2000 or Windows 2003.

2. From the Windows taskbar, click Start> Programs>

Administrative Tools> Computer Management.

3. In the left pane of the Computer Management window, click the

Device Manager icon.

4. For Windows 2000 and 2003, double-click the SCSI & RAID

Controllers icon. For Windows 2008, double-click the Storge

Controllers icon.

5. Under SCSI & RAID Controllers or Storage Controllers,

double-click the adapter you want to upgrade.

6. In the next window, click the Driver tab; then click Update Driver.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 149 150

Žádné komentáře

EMC QLogic Instalační příručka Strana 119