EMC Qlogic QLA23xx Instalační příručka stáhnout pdf (Strana 102)

102

EMC Fibre Channel and iSCSI with QLogic Host Bus Adapters in the Windows Environment

Miscellaneous Planning and Procedures

acceptable flash BIOS file for the adapter, the not an acceptable

flash BIOS data file message displays. Select a valid file, then

click OK.

5. The Security Check dialog box displays. In the Enter Password

box, type the password. Click OK.

6. The tabbed page appears dimmed during the update. When

complete, the flash BIOS update complete message displays.

7. Reboot the system.

QLogic SANsurfer SANblade Manager

Stratus ftServers are not supported using the QLogic SANsurfer SANblade

Manager Software or Agents.

EMC has approved the use of a specialized version of the QLogic

SANsurfer SANblade Manager for use with attached EMC

Symmetrix and CLARiiON storage arrays. Only the versions listed

below should be used; these versions are posted in the EMC section

on the QLogic website.

This Windows utility provides information on the installed QLogic

HBAs, driver versions, mapped targets, statistics, and configuration

settings. It also has a feature to update the HBA firmware/BIOS and

NVRAM. Obtain the latest EMC-approved firmware/BIOS and

NVRAM files from the QLogic website. Refer to “Downloading latest

QLogic drivers/firmware/BIOS files” on page 16 for instructions.

For information on the use and features of the QLogic SANsurfer

SANblade Manager utility, refer to the documentation posted with

this utility.

SANsurfer version history

SANsurfer versions include:

◆ 2.0.21 — Initial Release

The SANsurfer software is not multipath-aware and may misreport HBA

targets configured in multipath. This does not affect the use of the tool;

however, it will accurately report targets only on ports that own an active

LUN0.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 127 128

Žádné komentáře

EMC Qlogic QLA23xx Instalační příručka Strana 102